| PART |
Description |
Maker |
| Q6008LH1LED |
Q6008LH1LED series is designed to meet low load current characteristics typical in LED lighting applications.
|
Littelfuse
|
| Q6008LTH1LED |
Q6008LTH1LED series is designed to meet low load current characteristics typical in LED lighting applications.
|
Littelfuse
|
| Q6012LTH1LEDTP |
Q6012LTH1LED series is designed to meet low load current characteristics typical in LED lighting applications.
|
Littelfuse
|
| ISL6142 ISL6142CB ISL6152 ISL6152CB ISL6152IB |
Hot Plug Controller, Negative Voltage, -20V to -80V, Prog Inrush Current, IntelliTripCurrent Regulation, UV/OV Protection, Prog Time Out, Load current monitor, Active high PWRGD
Hot Plug Controller, Negative Voltage, -20V to -80V, Prog Inrush Current, IntelliTrip Current Regulation, UV/OV Protection, Prog Time Out, Load current monitor, Active low PWRGD-bar
Negative Voltage Hot Plug Controller
|
INTERSIL[Intersil Corporation]
|
| LO5022-471-RM LO5022-470-RM LO5022-101-RM LO5022-3 |
Surface Mount Power Inductors
0.2mV Prec Dual Voltage Comparator w/ Complementary Output Drivers, 16L CDIP, EPAD Enabled 1 ELEMENT, 100 uH, GENERAL PURPOSE INDUCTOR, SMD
0.2mV Prec Dual Voltage Comparator w/ Complementary Output Drivers, 16L SOIC, EPAD Enabled 1 ELEMENT, 3.3 uH, GENERAL PURPOSE INDUCTOR, SMD
|
http://
ICE Components, Inc.
|
| BGA318 Q62702-G0043 |
From old datasheet system
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 16 dB typical gain at 1.0 GHz 12 dBm typical P-1dB at 1.0 GHz) 硅双极单片放大器（级0瓦，增益模块十六分贝典型增益.0 GHz2 dBm典型的P - 1dB的在1.0千兆赫）
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 16 dB typical gain at 1.0 GHz 12 dBm typical P-1dB at 1.0 GHz) 0 MHz - 1200 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER
|
SIEMENS[Siemens Semiconductor Group]
SIEMENS AG
|
| BGA312 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 11 dB typical gain at 1.0 GHz 9 dBm typical P-1dB at 1.0 GHz)
|
Siemens Semiconductor Group
|
| BGA310 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 9 dB typical gain at 1.0 GHz 9 dBm typical P-1dB at 1.0 GHz 3 dB-bandwidth: DC to 2.4 GHz)
|
Siemens Semiconductor Group
|
| U1ZB10 U1ZB100 U1ZB11 U1ZB110 U1ZB12 U1ZB13 U1ZB15 |
CONSTANT VOLTAGE REGULATION TRANSIENT SUPPRESSORS
CONSTANT VOLTAGE REGULATION TRANSIENT SUPPRESSORS 恒电压调节暂态抑制器
Zener Diode SILICON DIFFUSED TYPE CONSTANT VOLTAGE REGULATION TRANSIENT SUPPRESSORS
|
Toshiba, Corp.
http://
Toshiba Corporation
TOSHIBA[Toshiba Semiconductor]
|
| MCP6002 MCP6002EP MCP6002ESN MCP6004 MCP6004E MCP6 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail
Operational Amplifier - Datasheet Reference
1 MHz Bandwidth Low Power Op Amp
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava
|
Microchip Technology Inc
MICROCHIP[Microchip Technology]
|
| MCP60104 MCP604T MCP601 MCP601-E_CH MCP601-E_OT MC |
MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 ...
MCP603 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP604 quad operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230. ...
2.7V to 5.5V Single-Supply CMOS Op Amps
|
MICROCHIP[Microchip Technology]
|
| ADG1604 ADG1604BCPZ-REEL ADG1604BCPZ-REEL7 ADG1604 |
1 Ω Typical On Resistance, ±5 V, 12 V, 5 V, and 3.3 V, 4:1 Multiplexer
1 楼? Typical On Resistance, 隆戮5 V, 12 V, 5 V, and 3.3 V, 4:1 Multiplexer
|
Analog Devices
|
